ZTE Blade A5 (2019) Tips and Tricks

To see which firmware version of Android you are using, use the pull-down menu by dragging your finger from the top of the phone. Select Settings and under System, choose About Device. ?

This should list your Android version, Build number and Model Number.

Drag down your notifications screen and press Settings. Then select System – Language and input. Then under Keyboards and input methods, press the little Gear icon.

From here you have various options including Haptic feedback, Vibration intensity and so on.

You can also adjust notifications for various functions.

Android manages your applications so if the phone is running low on memory, it will close the oldest running App.

If you do need to manually close an application go to Settings – Applications – Application manager. Then swipe the screen from right to left until you are on the Running screen.

Then choose the application you want to stop and select Force Stop.

Android has improved the facial unlock feature by creating a setting whereby you must blink when unlocking your phone. This prevents fraudsters using a photo of yourself and holding it up to the phone.

To activate this feature go to Settings – Personal – Lock screen and security – Screen lock type – Face unlock. Then setup your facial unlocking.

Then once that is done, go to Face unlock again and tick Presence check.

This may not be available on all devices.

A great new feature is dual shot which lets you take a picture of someone else with the rear camera, while simultaneously taking a picture of yourself with the front facing camera. The problem is this feature isn’t obvious to find as it isn’t included in the list of camera Modes.

To find it open your Camera App and you will see three icons in the top right corner. Dual shot is the middle icon of these. Press that and you both cameras will activate allowing you to shoot away.

This may not me available on all Models

If you are abroad and don’t want to pay high data roaming charges or travelling to an area with no network coverage, then you can save Google Maps for offline viewing later. ?Here are two ways to do this:

The first method will depend whether your phone supports it. First, open Google Maps and navigate to a section of the map that you want available offline. Then press on the search bar and scroll right to the bottom and select Make this map area available offline. You may need to repeat this with multiple areas.

Alternatively, open Google Maps and zoom down to street level. Then scroll around area you’ll be travelling too. If you’re visiting a city for example, do this at street level and cover as much area as you think you’ve be visiting. If you’re travelling outside a city, then street level view might be too detailed, so zoom out and just cover the main roads, towns etc. ?

This will load all the segments into your phone’s cache. Then when have arrived at your destination and you have data turned off, you will see the areas you’ve stored on the phone’s memory.

Note: this won’t give you your GPS location because that normally needs a data connection to pinpoint your position.

Warning: This will remove ALL data on the phone (but not the MicroSD card).

To perform a hard reset, or factory reset, then there are a number of methods to try:

1) Go to Settings – System – Reset Option . It may ask for a password. Then select
Erase all data (factory reset).

If the phone is totally unresponsive, even after a reboot, then try the following methods.

2) While the phone is turned off, press and hold the Volume Up and Volume Down buttons together. Then, while holding these, press and release the Power button (keep holding the volume buttons). The phone should turn on and a menu will appear. Press the Volume down button to navigate to the Recovery option. Press the Volume Up to select (if that doesn’t work, use the Power button to select). A yellow triangle and an Android logo will appear. Press the Volume Down and Volume Up button together and a recovery menu should appear. Use the Volume buttons to move to the Wipe data/Factory reset option and then press Power to select. Again, use the Volume Down key to choose Yes and press the Power button again to select.

3) While the phone is turned off, press and hold the Volume Down button. Then, while holding, press and release the Power button. A menu should appear. Use the Volume down key to go to Clear Storage. Use the Power button to select the option. Then when asked to confirm, press Volume Up for Yes.

4) While the phone is off, press and hold down Volume Up + Home + Power buttons at the same time. Then release the buttons when you see the Logo. Use the Volume Down button to go down and the Home or Power key to select. Choose the Wipe data/Factory reset option. Then Select Yes to delete all user data. Then choose to reboot the phone.

5) A final method is to enter the code into your phone’s dialler: *2767*3855# This method will not give you an option to reverse the process, so be careful! This method will only work if you can boot into your phone.?

If you would prefer to correct your own mistakes, then go to Settings – System – Language and input.

Then select the keyboard you are using and press the Settings icon again.

You should be able to find a predictive text option on this screen.

To add a widget, simply long press on a blank part of one of your homescreens. Then select Widget. Scroll through the list of available widgets and choose one. It will be placed on your homescreen and you can move it around as you desire.

Locking your phone is a great security feature, but when you’re at home it’s normally not necessary.

A featured called Trusted Places enables you to bypass the lock screen when you’re at specific geographic places.

To set it up go to Settings – Lock screen and security – Smart lock – Trusted places. You can also set up the bypass to work when your phone is connected to specific Bluetooth devices such as Smart watches or Audio devices.

You can also override this (i.e. lock your screen when it is at the location). To override, just press and hold the padlock icon on the lock screen.

This may not work on all phones, models or networks.