Xiaomi Redmi S2 Tips and Tricks

Android 8 (Oreo)
Phone: Xiaomi Redmi S2
Factory OS: Android 8 (Oreo)

Have you updated your Operating System?
Then view tips for the most recent OS version(s): Android 9 (Pie)
Or view tips for all Android versions

An almost essential setting is the ability to lock your screen by pressing the power key once. It will save plenty of time in the long run.

If this isn’t enabled, then go to Settings – Accessibility – Answering and ending calls.

Then select Pressing the power key.

To set your voicemail number which allows your phone to automatically input your voicemail password, then open your Dialler App.

Then press the More or Menu button and choose Call settings. Then scroll down to Voicemail settings and set a Voicemail number (you might need to check with your carrier for the correct number).

Depending on your carrier you may have to enter the series of steps required to go through the voicemail menu, for example: *86,,yourpassword# (a comma inserts a pause).

When browsing on your phone you may notice images are quite blurry. This is because your telecom provider is compressing the images before they are downloaded on to your phone.

There is no way to prevent this, but if you have a WiFi connection nearby, then you can turn that on. This will mean that all browser downloads come through the WiFi connection, rather than the carrier, and your images will appear normally.?

This also depends on your service provider and data package.

If you like to use vibration mode but you don’t want to disrupt a whole room due to the Xiaomi Redmi S2 vibration intensity, you can adjust or reduce that accordingly. Just follow the steps below on your phone:

  1. From your home screen, swipe down to open the notifications menu.
  2. Tap on the Settings icon (usually a gear-shaped one at the top-right portion).
  3. Scroll to Device then tap “Sound” or “Sounds and notifications” or “Sound & Vibration.”
  4. Under Sound, tap “Vibrations” or “Vibration Intensity.”
  5. A bar will appear where you can slide left or right to adjust the intensity of your phone’s vibration. On some phones, users can select from either Light, Medium, or Strong.
  6. Tap “OK.” This will automatically save your preference.

This generally works for the Xiaomi Redmi S2 and most Android phones.

For Huawei users, you may need to follow a slightly different method. If you use a Huawei unit, follow the instructions below instead:

  1. From the home screen, tap up to locate Settings.
  2. Then tap Settings → Strength
  3. Swipe up or down to adjust the vibration intensity. That’s from Strong, Soft, or None.
  4. Tap “OK.”
  5. You will be automatically reverted to the home screen. Don’t worry, your preferred vibration intensity is saved at this point.

There are a number of solutions to this error. Go through the following steps:

Go to Settings – Applications – Application manager. Then swipe right to left to go to All (along the top). Then find the App called Media Storage. Click on that and select Force Close. Then select Clear Data. (warning: this will delete the cache for your media player so you may lose things such as recently played, most played etc. But you will not lose your music).

Next, go back to list of Apps and find Music Player. Again, press Force Close and then Clear Data.

Once that’s done, go to the Play Store and download an App called Re Scan Media and run it. Wait 5 minutes for the device to re-scan your media.

If you still cannot play your music, then try turning your phone off and removing your SDCard / memory card (if you have one). Then turn the phone on without the card. Then turn it off again and reinsert the card. Finally turn it on again with the card back in.

If you still can’t play music, then some users have said that there may be a conflict with the Twitter App. Try uninstalling this and see if the error persists.

You can also try downloading some new media player from Play Store and try running media on this new player.

There is no need to be stuck with the standard Android keyboard, which isn’t always great for typing quickly.

Go to the Play Store and search for ‘Keyboard’ to see some great alternatives, many of which are more accurate and make typing much easier.

One of the very best is SwiftKey. They provide a free trial, but once the trial is over it is well worth the small amount of money they charge. It can increase your typing rates massively.

Another good one is GoKeyboard.

If you see a warning saying the keyboard will collect all information (including credit cards) just ignore this. This is just a security feature that Android shows for every third-party keyboard that you install.

There is a hidden Android Easter egg on the phone that Google has built into your device.

Go to Settings. Then scroll down to About device. Then tap on the Android version option 5 times.

Once you see something on the screen, you can then rub the screen with your finger to produce another surprise. If rubbing doesn’t work then try tapping with your finger. A combination of the above should work.

By the way don’t expect to see an actual Easter Egg. That is just the name given to things hidden inside software or operating systems.

To stop the Photo App or the Music player from indexing your files, place a blank text file called .nomedia in the folder containing your photos or music.

The best way to do this is to connect your device to a PC and then navigate to the relevant folder via your PC.

A useful feature of Android Lollipop is what’s called Screen Pinning. This allows you to lock your phone to one App. Perfect if you have a young child that you don’t want messing with your phone. Or if you want to lend your phone to someone to make a call, but make the call only.

To enable this go to Settings – Security – Screen pinning. Then go to the App you want to Pin and press the Multitask key. Then look at the most recent app and press the blue thumb tack icon in the bottom right corner.

To un-pin an App just press the Multitask key and the back key together.

To take a screen shot, hold down the Volume Down and Power Buttons together (i.e. exactly the same time).

This will save the current screen to your phone’s memory card. They will be stored in the folder /Device Storage/Pictures/Screenshots. You can get to this folder by going to your My Files App.