Sony Xperia XA1 Tips and Tricks

Warning: This will remove ALL data on the phone (but not the MicroSD card).

To perform a hard reset, or factory reset, then there are a number of methods to try:

1) Go to Settings – General management – Reset. It may ask for a password. Then select Erase everything.

If the phone is totally unresponsive, even after a reboot, then try the following methods.

2) While the phone is turned off, press and hold the Volume Up and Volume Down buttons together. Then, while holding these, press and release the Power button (keep holding the volume buttons). The phone should turn on and a menu will appear. Press the Volume down button to navigate to the Recovery option. Press the Volume Up to select (if that doesn’t work, use the Power button to select). A yellow triangle and an Android logo will appear. Press the Volume Down and Volume Up button together and a recovery menu should appear. Use the Volume buttons to move to the Wipe data/Factory reset option and then press Power to select. Again, use the Volume Down key to choose Yes and press the Power button again to select.

3) While the phone is turned off, press and hold the Volume Down button. Then, while holding, press and release the Power button. A menu should appear. Use the Volume down key to go to Clear Storage. Use the Power button to select the option. Then when asked to confirm, press Volume Up for Yes.

4) While the phone is off, press and hold down Volume Up + Home + Power buttons at the same time. Then release the buttons when you see the Logo. Use the Volume Down button to go down and the Home or Power key to select. Choose the Wipe data/Factory reset option. Then Select Yes to delete all user data. Then choose to reboot the phone.

5) A final method is to enter the code into your Phone App: *2767*3855# This method will not give you an option to reverse the process, so be careful! This method will only work if you can boot into your phone.

With the recent versions of Android you can now take photos while recording video by simply pressing the screen.

This will save that particular frame to the gallery while continuing to record video.

An almost essential setting is the ability to lock your screen by pressing the power key once. It will save plenty of time in the long run.

If this isn’t enabled, then go to Settings – Accessibility – Answering and ending calls.

Then select Press Power key to end calls.

Android now comes with some great battery management built into the OS.

Pull down your notifications screen and select Settings – Device maintenance.

Then go to Battery and you will see some useful stats such as the time remaining.

There are also options to set up various Power Saving modes.

Select one of these to really make your phone last the distance.

Be warned that these can limit your device quite considerably as certain features will be disabled in order to conserve battery life.

If you have forgotten your custom unlock pattern or PIN, then don’t panic.

After 5 unsuccessful tries a button should appear saying Forgot pattern or PIN. Press this and you will be asked to enter your Gmail username/password.

The phone will then ask for a new unlock pattern or PIN.

If it isn’t accepting your Google ID or password, then try the following options:

1) First, go to the following URL: https://myaccount.google.com/u/1/device-activity

Then when you see your device, select Revoke Access.

Then at the bottom of the page, you should see Generate New Application-Specific Password.

Enter a name and click on Generate Password.

A 16-digit pass code should be generated.

Enter this new password in your Android device, along with the correct Google ID.

2) If that doesn’t work, then go to: https://accounts.google.com/signin/recovery

Choose one of the recovery options. Then enter the email you used when you set up your device.

Follow the options depending on your situation and you should be guided through an option to get back into your phone.

If none of the above works, then you may have to hard reset / factory reset your device.

Before you do this, it’s recommended that you plug it in to a computer and copy across any files (particularly your photos in the DCIM folder). However it may not be possible to do this on some devices as it will be locked.

To find out information about Signal Strength, Network Information, Remaining Battery Time and Battery Usage (by Application), drag down your notifications screen and select Settings.

Select Device Maintenance – Battery.

From this screen you can see which Apps are using the most battery power and select Power Saving Mode.

If you then click the Battery Usage button you can see a wealth of valuable technical information about your phone which may help with diagnostics and network troubleshooting.

There are a couple of ways to add new home screens to your device.

The simplest is to go to one of your existing home screens and simply pinch the screen. This will show all of your home screens in thumbnail view. Then just press the Plus symbol to add another. You can also press and hold, then drag a home screen to a different position. Or press the little Home icon to make one of them your default home screen.

Another option is to download a Launcher App. These are third-party user interfaces that allow you to customize your phone in many ways. Most of them allow multiple home screens. A very popular launcher which supports multiple home screens is GoLauncher EX.

Simply go the Play Store and search for GoLauncher EX or another launcher.

Sometimes you may need your screen to stay on when plugged in via USB.

To do this, Drag down your notifications screen and press Settings. Then select Developer Options. Then check Stay Awake.

If you can’t see Developer options then you need to enable it. To do that, follow these instructions:

Go to Settings – System – About device – Software info and press on Build number 7 times. Developer options will now appear in the System section of your settings.

To delete or remove home screen widgets, simply press and hold. Then drag the widget to the top-right corner of the screen and into the Trash icon.

To save an image in an email or in the browser, long press on the image and a menu will appear allowing you to save it.

For images inside text messages, you might have to press and hold on the message itself, rather than the image.