Android 8 (Oreo) Tips and Tricks

There are a number of ways, as below. The first two of these may be disabled on some networks/carriers or Android versions however.

1) Go to Settings – Device – Applications – Application Manager. Then swipe from right to left until you are on the All screen (at the top). Then scroll down to Contacts Storage – Clear Data.

2) Go to Contacts. Then hold and press on a contact. Then choose the All option at the top of the screen and select Delete. .

3) Go to Settings – Personal – Accounts and sync. Then press More at the top and choose Disable auto sync. Then go to Gmail (or an account that your phone syncs with) and delete all of your Contacts from there. Then re-sync your phone.

4) Download an App called ‘Delete All Contacts’ and use that as a last resort.

The methods above will delete contacts from the Phone only, not the SIM card.

If you like to use vibration mode but you don’t want to disrupt a whole room due to the Operating System Android 8 Oreo vibration intensity, you can adjust or reduce that accordingly. Just follow the steps below on your phone:

1. From your home screen, swipe down to open the notifications menu.
2. Tap on the Settings icon (usually a gear-shaped one at the top-right portion).
3. Scroll to Device then tap “Sound” or “Sounds and notifications” or “Sound & Vibration.”
4. Under Sound, tap “Vibrations” or “Vibration Intensity.”
5. A bar will appear where you can slide left or right to adjust the intensity of your phone’s vibration. On some phones, users can select from either Light, Medium, or Strong.
6. Tap “OK.” This will automatically save your preference.

This generally works for the Operating System Android 8 Oreo and most Android phones.

For Huawei users, you may need to follow a slightly different method. If you use a Huawei unit, follow the instructions below instead:

1. From the home screen, tap up to locate Settings.
2. Then tap Settings → Strength
3. Swipe up or down to adjust the vibration intensity. That’s from Strong, Soft, or None.
4. Tap “OK.”
5. You will be automatically reverted to the home screen. Don’t worry, your preferred vibration intensity is saved at this point.

To find out information about Signal Strength, Network Information, Remaining Battery Time and Battery Usage (by Application), drag down your notifications screen and select Settings.

Then under System, select About device and choose Status.?

To use your phone as a WiFi hotspot, tether it via USB or via Bluetooth, then go to Settings – Wireless and Network – Mobile hotspot and tethering.

You can then choose from three options:

1) USB – connect your phone via a USB cable. The phone should automatically configure the correct settings.

2) Mobile/WiFi Hotspot – To turn your phone into a WiFi hotspot, press Configure WiFi hotspot. You will then be asked to enter a Network SSID (this is your own name for the WiFi hotspot). Then choose Security and lastly, choose a password (this is password for your WiFi hotspot which you will enter on your computer).

3) Bluetooth – With this option, you will need to pair a Bluetooth device with your phone. On the other device, ensure you search for Bluetooth devices and your phone should show up.

If you find yourself woken up by notifications, text messages or incoming calls, then there is a handy feature called Blocking mode.

To enable this go to Settings – Device – Sounds and notifications – Do not disturb.

From here you can set a From and To time in which to block these notifications.

You can also allow notifications through from certain contacts that you don’t mind bothering you.

Warning: This will remove ALL data on the phone (but not the MicroSD card).

To perform a hard reset, or factory reset, then there are a number of methods to try:

1) Go to Settings – Personal – Backup and reset – Factory data reset – Reset device. It may ask for a password. Then select Erase everything.

If the phone is totally unresponsive, even after a reboot, then try the following methods.

2) While the phone is turned off, press and hold the Volume Up and Volume Down buttons together. Then, while holding these, press and release the Power button (keep holding the volume buttons). The phone should turn on and a menu will appear. Press the Volume down button to navigate to the Recovery option. Press the Volume Up to select (if that doesn’t work, use the Power button to select). A yellow triangle and an Android logo will appear. Press the Volume Down and Volume Up button together and a recovery menu should appear. Use the Volume buttons to move to the Wipe data/Factory reset option and then press Power to select. Again, use the Volume Down key to choose Yes and press the Power button again to select.

3) While the phone is turned off, press and hold the Volume Down button. Then, while holding, press and release the Power button. A menu should appear. Use the Volume down key to go to Clear Storage. Use the Power button to select the option. Then when asked to confirm, press Volume Up for Yes.

4) While the phone is off, press and hold down Volume Up + Home + Power buttons at the same time. Then release the buttons when you see the Logo. Use the Volume Down button to go down and the Home or Power key to select. Choose the Wipe data/Factory reset option. Then Select Yes to delete all user data. Then choose to reboot the phone.

5) A final method is to enter the code into your phone’s dialler: *2767*3855# This method will not give you an option to reverse the process, so be careful! This method will only work if you can boot into your phone.

Rather than having to locate the hang up icon on the screen after each call, you can quickly end a call by pressing the Power button.

To enable this feature, go to Settings – Personal – Accessibility – Answering/ending calls. Then tick The power button ends calls.

Google have hidden a clone of an Octopus inside of the Android Oreo OS.

To access this follow these instructions:
Drag down the notifications screen and go to Settings. Then scroll down to About device. Then tap on the Android version option 5 times.

You should now see a Lollipop on the screen or a double layer Oreo for Android 8.1.

Keep pressing the Lollipop/Oreo and after awhile a flying Octopus will appear.

You may need to long press on the Lollipop if multiple presses doesn’t work.

You can drag and fling that Octopus all around your screen. The eight tentacles represented 8.0

A useful feature of Android Lollipop is what’s called Screen Pinning. This allows you to lock your phone to one App. Perfect if you have a young child that you don’t want messing with your phone. Or if you want to lend your phone to someone to make a call, but make the call only.

To enable this go to Settings – Security – Screen pinning. Then go to the App you want to Pin and press the Multitask key. Then look at the most recent app and press the blue thumb tack icon in the bottom right corner.

To un-pin an App just press the Multitask key and the back key together.

A great new feature is dual shot which lets you take a picture of someone else with the rear camera, while simultaneously taking a picture of yourself with the front facing camera. The problem is this feature isn’t obvious to find as it isn’t included in the list of camera Modes.

To find it open your Camera App and you will see three icons in the top right corner. Dual shot is the middle icon of these. Press that and you both cameras will activate allowing you to shoot away.

This may not me available on all Models