Motorola Moto Z4 Tips and Tricks

Looking to find the IMEI nunber for your Motorola Moto Z4? Read on.

An IMEI is a unique serial number that is assigned to your phone. Each phone has a unique IMEI, regardless of brand and model. Most insurance companies would ask for your IMEI because this helps them report and block the device once it gets lost or stolen.

If you’ve just bought your Motorola Moto Z4, it is best to keep its package box and avoid throwing that to the bin. That could be very handy when you do lose your phone and you need to trace it using the IMEI code.

There are several ways to get your IMEI number by just using your phone. The easiest way is to go to the dialer and press *#06#. The IMEI should be displayed on your screen after entering the code.

Now for those who dialled *#06# on their phones, some might be seeing two types of serial numbers. Just take note of the first one, because that is most likely the IMEI.

Aside from that, you can also go to Settings → System → About Device → Status, then scroll down to locate your IMEI number. This could vary a bit depending on your phone model. Some smartphones list the IMEI under the About Device section. So just scroll down in case you don’t see it under System or Status.

The IMEI is also often imprinted on your battery cover. This means that you have to dismantle the back cover of your phone to get a copy of it. This is rather inconvenient. If you can still access your IMEI using the phone itself, then just do so. Except if your Motorola Moto Z4 is locked or has no power for some reason.

If you like to use vibration mode but you don’t want to disrupt a whole room due to the Motorola Moto Z4 vibration intensity, you can adjust or reduce that accordingly. Just follow the steps below on your phone:

1. From your home screen, swipe down to open the notifications menu.
2. Tap on the Settings icon (usually a gear-shaped one at the top-right portion).
3. Scroll to Device then tap “Sound” or “Sounds and notifications” or “Sound & Vibration.”
4. Under Sound, tap “Vibrations” or “Vibration Intensity.”
5. A bar will appear where you can slide left or right to adjust the intensity of your phone’s vibration. On some phones, users can select from either Light, Medium, or Strong.
6. Tap “OK.” This will automatically save your preference.

This generally works for the Motorola Moto Z4 and most Android phones.

For Huawei users, you may need to follow a slightly different method. If you use a Huawei unit, follow the instructions below instead:

1. From the home screen, tap up to locate Settings.
2. Then tap Settings → Strength
3. Swipe up or down to adjust the vibration intensity. That’s from Strong, Soft, or None.
4. Tap “OK.”
5. You will be automatically reverted to the home screen. Don’t worry, your preferred vibration intensity is saved at this point.

Android has improved the facial unlock feature by creating a setting whereby you must blink when unlocking your phone. This prevents fraudsters using a photo of yourself and holding it up to the phone.

To activate this feature go to Settings – Personal – Lock screen and security – Screen lock type – Face unlock. Then setup your facial unlocking.

Then once that is done, go to Face unlock again and tick Presence check.

This may not be available on all devices.

Android has a feature allowing you to update Applications automatically. This is turned off by default, but you can turn it on.

Open the Play Store App and press the Menu icon in the top left of the App. Then select Settings and in Notification section you can turn Auto-update apps on.

From here you can chose to do this over WiFi only or using your Data connection.?

To add a widget, simply long press on a blank part of one of your homescreens. Then select Widget. Scroll through the list of available widgets and choose one. It will be placed on your homescreen and you can move it around as you desire.

Warning: This will remove ALL data on the phone (but not the MicroSD card).

To perform a hard reset, or factory reset, then there are a number of methods to try:

1) Go to Settings – System – Reset Option . It may ask for a password. Then select
Erase all data (factory reset).

If the phone is totally unresponsive, even after a reboot, then try the following methods.

2) While the phone is turned off, press and hold the Volume Up and Volume Down buttons together. Then, while holding these, press and release the Power button (keep holding the volume buttons). The phone should turn on and a menu will appear. Press the Volume down button to navigate to the Recovery option. Press the Volume Up to select (if that doesn’t work, use the Power button to select). A yellow triangle and an Android logo will appear. Press the Volume Down and Volume Up button together and a recovery menu should appear. Use the Volume buttons to move to the Wipe data/Factory reset option and then press Power to select. Again, use the Volume Down key to choose Yes and press the Power button again to select.

3) While the phone is turned off, press and hold the Volume Down button. Then, while holding, press and release the Power button. A menu should appear. Use the Volume down key to go to Clear Storage. Use the Power button to select the option. Then when asked to confirm, press Volume Up for Yes.

4) While the phone is off, press and hold down Volume Up + Home + Power buttons at the same time. Then release the buttons when you see the Logo. Use the Volume Down button to go down and the Home or Power key to select. Choose the Wipe data/Factory reset option. Then Select Yes to delete all user data. Then choose to reboot the phone.

5) A final method is to enter the code into your phone’s dialler: *2767*3855# This method will not give you an option to reverse the process, so be careful! This method will only work if you can boot into your phone.?

Android now has privacy or incognito mode built into the stock browser.

Open your Browser App and press the Tabs icon at the bottom or top depending on your bowser. Then press the Menu or More button at the top. Then select New secret tab or select Open Incognito Tab. ?

Another option is to use the popular Dolphin browser whenever you want to browse privately. Then each time you exit, Dolphin asks you whether you want to delete your Cache or History. If you select yes, then your activity will be untraceable. You may need to check this is enabled in the Dolphin settings.

To find out information about Signal Strength, Network Information, Remaining Battery Time and Battery Usage (by Application), drag down your notifications screen and select Settings.

Then under System, select About device and choose Status.?

With the recent versions of Android you can now take photos while recording video by simply pressing the screen.

This will save that particular frame to the gallery while continuing to record video.

Normally you can simply insert a SIM card and you will be able to browse the internet using 3G. Sometimes, this must be setup manually however. Before you start, you will need to ask your carrier or Telco for your APN settings.

Once you have those, go to Settings – Connections – Mobile networks – Access Point Names.

From here press the Plus sign at the top right and select New APN. Then fill in the details your carrier gave you. Then press the menu button and press Save.