Motorola Moto X Tips and Tricks

Jelly Bean has improved the facial unlock feature by creating a setting whereby you must blink when unlocking your phone. This prevents fraudsters using a photo of yourself and holding it up to the phone.

To activate this feature go to Settings – Lock screen – Screen lock – Face unlock. Then setup your facial unlocking.

Then once that is done, go to Face unlock again and tick Presence check.

Warning: This will remove ALL data on the phone (but not the MicroSD card).

To perform a hard reset, or factory reset, then there are a number of methods to try:

1) From the home screen, press Menu – Backup and reset – Factory data reset – Reset phone. It may ask for a password. Then select Erase everything

If the phone is totally unresponsive, even after a reboot, then try the following methods.

2) While the phone is turned off, press and hold the Volume Up and Volume Down buttons together. Then, while holding these, press and release the Power button (keep holding the volume buttons). The phone should turn on and a menu will appear. Press the Volume down button to navigate to the Recovery option. Press the Volume Up to select (if that doesn’t work, use the Power button to select). A yellow triangle and an Android logo will appear. Press the Volume Down and Volume Up button together and a recovery menu should appear. Use the Volume buttons to move to the Wipe data/Factory reset option and then press Power to select. Again, use the Volume Down key to choose Yes and press the Power button again to select.

3) While the phone is turned off, press and hold the Volume Down button. Then, while holding, press and release the Power button. A menu should appear. Use the Volume down key to go to Clear Storage. Use the Power button to select the option. Then when asked to confirm, press Volume Up for Yes.

4) While the phone is off, press and hold down Volume Up + Home + Power buttons at the same time. Then release the buttons when you see the Logo. Use the Volume Down button to go down and the Home or Power key to select. Choose the Wipe data/Factory reset option. Then Select Yes to delete all user data. Then choose to reboot the phone.

5) A final method is to enter the code into your phone’s dialler: *2767*3855# This method will not give you an option to reverse the process, so be careful! This method will only work if you can boot into your phone.

Face Unlock allows you to unlock your phone by holding it up to your face. It is highly recommended to use the Improve Face Unlock feature to make the recognition faster and more accurate.

First, ensure you have Face Unlock enabled. Menu – Settings – Lock screen. Then chose Screen lock Face Unlock.

Once that is done go to Menu – Settings – Lock screen – Improve facial recognition. You might have to do this a few times to improve the speed of recognition. It is also a good idea to position the phone at different angles to your head to improve the accuracy.

The brightness of the browser is set separately to the phone’s main brightness. If you find the screen dims or brightens when you go into your browser, then you can change this by opening the browser, pressing the Menu key and scrolling down until you see Brightness and colour. You can adjust it from here.

To adjust the phone’s main brightness, go to the Homescreen, press Menu – Settings – Display – Brightness.

An alternative is to use a third party browser like Dolphin, Firefox, Opera and so on. These all use the phone’s main brightness setting.

Lastly, sometimes Power Saving Mode affects the screen brightness. Go to Settings – Power Saving Mode and change the Background Colour Only mode in there. Power Saving Mode can be found by in the Notifications bar by swiping down from the top of the screen too.

Jelly Bean has an interesting new feature called Talkback which is designed for blind and low vision users.

The feature is an interesting way to navigate your phone however.

Simply go to Settings – Accessibility – Talkback to activate it. Then your phone will give you an ongoing narration of its various functions.

Most Android phones only come with a fixed amount of homescreens. There is a way to add more however.

Go to Android Play Market and search for ‘launcher’. These are third-party user interfaces that allow you to customize your phone in many ways. Most of them allow multiple homescreens.

A very popular launcher which supports multiple homescreens is GoLauncher EX.

To enable Face Unlock, go into Settings – Lock screen – Screen lock.

Then select Face unlock. From here you will be required to look at the phone via the front facing camera. It is usually better to do this during the day when the lighting is better, although the phone will guide you through the process.

It is best to avoid task killers such as Advanced Task Killer. Android is designed to automatically pre-load certain applications, even if you don’t load them yourself. If it starts to run low on memory, it will smartly unload the oldest running apps automatically.

Manually killing tasks will only mean they get loaded in memory again. Task killers can make the phone slow, laggy, or drain battery life more quickly.

If you have used up all of your Quick Launch spaces, then there is a trick.

Once it is full, press and drag an App from the homescreen and move it over the top of an App in the Quick Launch area. Then release your finger. This will create a folder containing the original App plus the new one. This is a great way to have access to regularly used Apps.

There are a couple of ways to bring up one of your contacts.

First, while in your Contacts App, simply start typing in the search bar at the top of the screen.

Or else a quicker method is to use the Goole Search widget (installed by long pressing on a vacant part of your homescreen and installing the widget) and start typing the name of the contact you want to dial. This will quickly filter the correct contact.