Motorola Moto X Pure Edition Tips and Tricks

There are a number of ways to get your IMEI number.

First, you can go to Settings – System – About device – Status. Scroll down and you should see IMEI listed on the screen.

Secondly, often the box that your device came in will have the IMEI printed on the label of the box or on the invoice.

Thirdly, if your device has a removable battery then open the cover and remove the battery. Your IMEI should be on a serial number plate and your IMEI number should be shown there.

Lastly, from the Dialler, enter *#06# and it should be displayed on the screen. This won’t work on all phones and all networks however.

To see which firmware version of Android you are using, use the pull-down menu by dragging your finger from the top of the phone. Select Settings and under System, choose About Device.

This should list your Android version, Build number and Model Number.

Your phone comes with a handy widget which lets you kill all running tasks. This is great if you want to quickly free up some memory.

To use the widget, press and hold for 2 seconds on a blank part of any homescreen. Then find the Active Apps Manager widget and install it.

Once that is done, press the widget and it will show you all currently running Apps. Press End all to close all running Apps.

Here are the top 5 tips to make your phone run faster:

1) Use only essential widgets on your homescreen – each widget consumes memory and processing power which can slow your down your phone.

2) Uninstall apps that you don’t use – after awhile your phone can get cluttered as some Apps are designed to always run in the background. If you rarely use an App, then uninstall it to free up memory and CPU resource.

3) Install Apps to your phone memory – if you have an SDCard, always install Apps to the phone memory, which can be accessed faster. If you have Apps on the SDCard, then move them back to the phone memory with an App called Move2SD available from the Play Market.

4) Use Static rather than Live wallpapers – Live wallpapers consume processing power and memory. Unless you really must have them, uninstall them.

5) Kill tasks occasionally – Some Apps will run in the background indefinitely unless you kill them. Most of them won’t cause a problem, but it pays to check your running tasks from time to time. Hold down your Home key and check the Task Manager.

One last thing: Don’t use Task Killers. Android manages tasks very well and Task Killers just make your phone unstable and can slow it down further.

Warning: This will remove ALL data on the phone (but not the MicroSD card).

To perform a hard reset, or factory reset, then there are a number of methods to try:

1) Go to Settings – Personal – Backup and reset – Factory data reset – Reset device. It may ask for a password. Then select Erase everything.

If the phone is totally unresponsive, even after a reboot, then try the following methods.

2) While the phone is turned off, press and hold the Volume Up and Volume Down buttons together. Then, while holding these, press and release the Power button (keep holding the volume buttons). The phone should turn on and a menu will appear. Press the Volume down button to navigate to the Recovery option. Press the Volume Up to select (if that doesn’t work, use the Power button to select). A yellow triangle and an Android logo will appear. Press the Volume Down and Volume Up button together and a recovery menu should appear. Use the Volume buttons to move to the Wipe data/Factory reset option and then press Power to select. Again, use the Volume Down key to choose Yes and press the Power button again to select.

3) While the phone is turned off, press and hold the Volume Down button. Then, while holding, press and release the Power button. A menu should appear. Use the Volume down key to go to Clear Storage. Use the Power button to select the option. Then when asked to confirm, press Volume Up for Yes.

4) While the phone is off, press and hold down Volume Up + Home + Power buttons at the same time. Then release the buttons when you see the Logo. Use the Volume Down button to go down and the Home or Power key to select. Choose the Wipe data/Factory reset option. Then Select Yes to delete all user data. Then choose to reboot the phone.

5) A final method is to enter the code into your phone’s dialler: *2767*3855# This method will not give you an option to reverse the process, so be careful! This method will only work if you can boot into your phone.

An almost essential setting is the ability to lock your screen by pressing the power key once. It will save plenty of time in the long run.

If this isn’t enabled, then go to Settings – Personal – Accessibility – Answering and ending calls. Then select Pressing the power key.

If you regularly visit a website you can add a shortcut to your homescreen which can be quite useful, rather than entering the web address each time you want to visit the site.

You can either do this to an existing Bookmark, or simply a page you’re visiting:

1) Open your Browser App. Enter the website you want to bookmark. You may need to wait for the whole page to load first. Then press the phone’s Menu button or More at the top and select Add shortcut to home screen.

2) Open your Browser App. Find an existing Bookmark by pressing the Bookmarks icon at the bottom of the App. Select the Bookmark and repeat the above steps.

To remove numbers from the call log that you don’t want anyone seeing, then open your Call Log.

This will normally be found on your Apps list or you can also go to your Dialler and find Logs or Call Logs.

Then press and hold on the contact you want to remove. When the Menu appears, press Delete.

To change your default font, go to Settings – Device – Display – Font. You can also change the font size here also.

Another option is to install the popular Go Launcher EX App. Then once this is installed, download their GoLauncher Fonts App.

To change the backlight screen timeout, drag down your notifications screen and press Settings. Then under System select Display. Then under Screen timeout you can set the screen time out duration.

You can also tell the phone screen to always stay lit when it is plugged in via USB. Go to Settings – System – Developer Options. Then check Stay Awake.

Note: Developer Options is not always enabled by default. To enable, go to Settings – System – About Device. Then tap on Build number 7 times to enable this secret option.