LG G6 Tips and Tricks

If you see the following errors:
Resting robot
Exclamation point (for rooted phones)
No command

This indicates that your phone is in Android Recovery mode and often appear when you try to recover or reboot.

To fix this, follow these steps:

1. Once any of the three appears, press and hold your phone’s volume up button for 10-15 seconds.

2. Next, without letting go of the volume up button, press and release the power button once. It will display a menu.

3. Navigate around the menu using the volume button.

4. Select Reboot System Now and your phone should be rebooting

Alternatively, you can do the following:

1. When any of the three appears, press and hold the power button for 2-3 seconds.

2. Then, without letting go of the power button, press and release the volume up button, once. It will display the same menu.

3. Select Reboot System Now and your phone should reboot.

If Reboot System Now doesn’t work try updating first.

A great new feature is dual shot which lets you take a picture of someone else with the rear camera, while simultaneously taking a picture of yourself with the front facing camera. The problem is this feature isn’t obvious to find as it isn’t included in the list of camera Modes.

To find it open your Camera App and you will see three icons in the top right corner. Dual shot is the middle icon of these. Press that and you both cameras will activate allowing you to shoot away.

Most Android devices come with an alternative way of entering text called Swype. Many prefer this method and believe it is quicker.

When any text entry box appears, press and hold the box. Then select Input method: SWYPE. Once enabled, you simply drag your finger around the keyboard moving over the letters in the correct order to spell a word.

Android manages your applications so if the phone is running low on memory, it will close the oldest running App.

If you do need to manually close an application go to Settings – Apps.

Then select the application you want to stop and select Force Stop.

Sometimes while typing long text or SMS messages you will get a message saying Converting to multimedia message. This won’t normally cause a problem, however some users do not want to send a MMS message.

There are a number of different settings to deal with this, however there isn’t really a way to prevent the phone from converting to an MMS. The reason for this is that any message over 480 characters cannot be sent as an SMS message. They must be sent as an MMS. The is a restriction of SMS messages in general, similar to the original limit of 160 characters.

What you can do however is ensure you get alerted when you have reached 480 characters. Then you can decide to send the message as an SMS and continue your conversation on a second message.

To check this setting is on, open your Message App and press Settings in the top right, then settings again, then More settings.

Then select Multimedia messages – Set restrictions and choose Warning. You will now be told when your message is being converted to MMS.

You can also change the settings for Creation mode which lets you restrict messages that go over a certain size. If you select Warning or Restricted, you should get further warnings when your message is really large and may not be handled by the network.

While using the standard Android Video App, you can lock the your screen while watching videos by pressing the power button.

This will disable the touchscreen buttons while the video is playing, but it won’t turn the screen off like the lock key normally does.

Note, this will only work on video files that you are playing that are stored on your phone and using the native Video App. It won’t work for videos played within websites, such as YouTube videos or other Apps such as MX Player, which have their own lock screen settings.

To change the backlight screen timeout, drag down your notifications screen and press Settings.

Then select Display.

Then under Screen timeout you can set the screen time out duration.

You can also tell the phone screen to always stay lit when it is plugged in via USB:

Go to Settings – System – Developer Options. Then check Stay Awake.

Note: Developer Options is not always enabled by default. To enable, go to:

Settings – System – About Device – Software info . Then tap on Build number 7 times to enable this secret option.

If you regularly visit a website you can add a shortcut to your home screen which can be quite useful, rather than entering the web address each time you want to visit the site.

You can either do this to an existing Bookmark, or simply a page you’re visiting:

1) Open your Browser App. Enter the website you want to bookmark. You may need to wait for the whole page to load first. Then press the phone’s Menu button or More at the top and select Add to Home screen.

2) Open your Browser App. Find an existing Bookmark by pressing the Bookmarks icon at the bottom of the App. Select the Bookmark and repeat the above steps.

To enable or disable the vibrate function when you receive text messages, go to the Messaging App and press the Settings icon in the top right.

Then select Notifications – Vibrate when sound plays.

To enable or disable vibration for incoming phone calls, then go to your main Settings, then Sounds and vibrations, then Vibrate when ringing.

To fix touchscreen sensitivity issues, follow these:

1. On your dialler, dial *#2663#. This will bring up a menu.

2. Bring up dialler and dial *#2663# to bring up a menu

3. On that menu, tap the button that says ?TSP FW update (general)?

4. Once you press that, a pop-up will appear saying ?Updating, do not turn off.? Just wait for it to finish updating.

5. A message saying ?update complete: pass? should appear once update is complete.

6. Exit the menu by pressing the back button and try out your device. It should be fixed now.