Lenovo P2 Tips and Tricks

Soft resetting is just the process of rebooting your phone. In contrast, a hard rest is when you remove everything from the phone to restore it to the factory state.

Normally you can simply restart the phone in the normal way via the power button, but if it has crashed, that may not be possible.

To soft reset your phone press and hold the Power/Lock button for around 8 to 10 seconds. The phone will restart automatically.

If that doesn’t work, then remove the battery (if it has one). Wait 30 seconds and put the battery back in. Then press the Power/Lock button to turn the phone on.

To access the scientific calculator, simply open the calculator App and rotate the phone to landscape mode.

The calculator will automatically change to a scientific one.

The phone has the ability to send quick response text messages if your phone is ringing but you can’t answer it.

To change these, go to your Text Message (SMS) App and press the Menu or More button.

Then select Settings – Quick responses.

From here you can add or edit your reject messages.

If you regularly visit a website you can add a shortcut to your home screen which can be quite useful, rather than entering the web address each time you want to visit the site.

You can either do this to an existing Bookmark, or simply a page you’re visiting:

1) Open your Browser App. Enter the website you want to bookmark. You may need to wait for the whole page to load first. Then press the phone’s Menu button or More at the top and select Add to Home screen.

2) Open your Browser App. Find an existing Bookmark by pressing the Bookmarks icon at the bottom of the App. Select the Bookmark and repeat the above steps.

If you like your Apps neatly sorted into folders, or just need to clear up some space on your home screens, then there is a simple way to accomplish this.

First find the first App you would like in a folder. Then choose a second App.

Press and hold on the second App and drag it over the top of the first App. They will both combine into a folder.

You can repeat this process to add more.

To undo this, press to go into the folder. Then press and hold an App icon to place it outside of the folder again.

Checking Available RAM and CPU utilization on your Lenovo P2 is very helpful if you are thinking about removing more Apps.

Looking at which Apps drain your RAM, CPU time, and battery will help you decide which of them should be removed from your phone.

To do this, just follow the simple steps below:

1. Go to your phone settings. You can do this by swiping down the home screen to reveal the notification bar. From there, tap on the gear icon to open Settings.
2. Look for Device Maintenance → Memory
3. Alternately, you can also tap on “Data Usage,” then scroll down to see which apps are taking up CPU power.
4. You may also look for “Smart Manager.” You will see the status of your RAM and Storage in this area. If you tap RAM, you will see a list of apps that are taking up much of your RAM.
5. For Huawei users, you can look for “Storage” under Settings.

All methods from 2 to 4 can be accessed on the Phone Settings alone. There are certain variations, depending on your phone or unit.

This section should also show what is taking up valuable CPU time. Useful if you think some Apps are draining your battery.

No one likes nuisance phone calls, so here’s how to deal with these on your phone.

The first option is to block all anonymous calls, although this may block some calls from people or companies that you do want to allow, so use this carefully.

To enable this, go to your Dial App press the settings icon in the top right. Then choose Settings.

Then choose Block numbers and then Block unknown callers.

Secondly, if you’d like to block calls on a case-by-case basis, then follow these instructions:

First, wait until you’ve been called by a nuisance number. You can either answer and verify who they are, or when the phone is ringing, do a quick Google search for the number (ideally on a PC, otherwise you may need to switch between apps on your phone).

Often the number will come up on Page 1 of Google and be reported as a nuisance call number. You can often tell pretty quickly because the number will have many negative review.

Then once the phone has stopped ringing, go to your Dial App and then select Log to find the number on your recent call list.

Find the number that called you and press on it. Then in the top right, select More and select Block/unblock number.

To manage this list, then go back to the first screen of your Dial App and press the settings icon in the top right. Then choose Settings.

Then select Block numbers. From here you can see which ones to block or unblock.

From now on you will see that you received a missed call, however the phone will not ring and you won’t be bothered by the caller.

When taking photos or videos, tap the screen where you want to focus on.

The phone will automatically adjust the settings to improve the image or video

If you see the following errors:
Resting robot
Exclamation point (for rooted phones)
No command

This indicates that your phone is in Android Recovery mode and often appear when you try to recover or reboot.

To fix this, follow these steps:

1. Once any of the three appears, press and hold your phone’s volume up button for 10-15 seconds.

2. Next, without letting go of the volume up button, press and release the power button once. It will display a menu.

3. Navigate around the menu using the volume button.

4. Select Reboot System Now and your phone should be rebooting

Alternatively, you can do the following:

1. When any of the three appears, press and hold the power button for 2-3 seconds.

2. Then, without letting go of the power button, press and release the volume up button, once. It will display the same menu.

3. Select Reboot System Now and your phone should reboot.

If Reboot System Now doesn’t work try updating first.

If you want to find your phone’s WiFi MAC address (for improved WiFi security), then go to Settings – About device or About phone – Status.

Then scroll down until you see WiFi MAC Address. The address should be a series of Hex numbers and letters.