Huawei Honor Note 10 Tips and Tricks

Warning: This will remove ALL data on the phone (but not the MicroSD card).

To perform a hard reset, or factory reset, then there are a number of methods to try:

1) Go to Settings – Personal – Backup and reset – Factory data reset – Reset device. It may ask for a password. Then select Erase everything.

If the phone is totally unresponsive, even after a reboot, then try the following methods.

2) While the phone is turned off, press and hold the Volume Up and Volume Down buttons together. Then, while holding these, press and release the Power button (keep holding the volume buttons). The phone should turn on and a menu will appear. Press the Volume down button to navigate to the Recovery option. Press the Volume Up to select (if that doesn’t work, use the Power button to select). A yellow triangle and an Android logo will appear. Press the Volume Down and Volume Up button together and a recovery menu should appear. Use the Volume buttons to move to the Wipe data/Factory reset option and then press Power to select. Again, use the Volume Down key to choose Yes and press the Power button again to select.

3) While the phone is turned off, press and hold the Volume Down button. Then, while holding, press and release the Power button. A menu should appear. Use the Volume down key to go to Clear Storage. Use the Power button to select the option. Then when asked to confirm, press Volume Up for Yes.

4) While the phone is off, press and hold down Volume Up + Home + Power buttons at the same time. Then release the buttons when you see the Logo. Use the Volume Down button to go down and the Home or Power key to select. Choose the Wipe data/Factory reset option. Then Select Yes to delete all user data. Then choose to reboot the phone.

5) A final method is to enter the code into your phone’s dialler: *2767*3855# This method will not give you an option to reverse the process, so be careful! This method will only work if you can boot into your phone.

To see notifications on your Lock screen, the best option is to download an App called NoLed from the Play Store. This will show notifications such as text messages, emails and missed calls as bright icons on your homescreen.

You can choose between very small squares or small icons and these can assigned by coloured.

Sometimes you will want to prevent your device fro, displaying or indexing folders on your Phone storage or USB storage.

To do this, simply rename the folder and place a . (full top / period) before the file or folder name.

This can be done through the Files App or by plugging your device in to your computer and renaming it there.

Sometimes while typing long text or SMS messages you will get a message saying Converting to multimedia message. This won’t normally cause a problem, however some users do not want to send a MMS message.

There are a number of different settings to deal with this, however there isn’t really a way to prevent the phone from converting to an MMS. The reason for this is that any message over 480 characters cannot be sent as an SMS message. They must be sent as an MMS. The is a restriction of SMS messages in general, similar to the original limit of 160 characters.

What you can do however is ensure you get alerted when you have reached 480 characters. Then you can decide to send the message as an SMS and continue your conversation on a second message.

To check this setting is on, open your Message App and press More – Settings and More Settings – Multimedia messages. Then select Set restrictions and choose Warning. You will now be told when your message is being converted to MMS.

You can also change the settings for Creation mode which lets you restrict messages that go over a certain size. If you select Warning or Restricted, you should get further warnings when your message is really large and may not be handled by the network.

Note: This availability of this feature depends on your device.

While in the Camera App, there are two ways to zoom in or out.

First, you can use Volume Up and Down keys.

Secondly, you can pinch your fingers on the screen to zoom in and out.

To open a web page in a new tab, find a link on a web page. Then press on it and then choose to open the site in a new tab.

If you like to use vibration mode but you don’t want to disrupt a whole room due to the Huawei Honor Note 10 vibration intensity, you can adjust or reduce that accordingly. Just follow the steps below on your phone:

1. From your home screen, swipe down to open the notifications menu.
2. Tap on the Settings icon (usually a gear-shaped one at the top-right portion).
3. Scroll to Device then tap “Sound” or “Sounds and notifications” or “Sound & Vibration.”
4. Under Sound, tap “Vibrations” or “Vibration Intensity.”
5. A bar will appear where you can slide left or right to adjust the intensity of your phone’s vibration. On some phones, users can select from either Light, Medium, or Strong.
6. Tap “OK.” This will automatically save your preference.

This generally works for the Huawei Honor Note 10 and most Android phones.

For Huawei users, you may need to follow a slightly different method. If you use a Huawei unit, follow the instructions below instead:

1. From the home screen, tap up to locate Settings.
2. Then tap Settings → Strength
3. Swipe up or down to adjust the vibration intensity. That’s from Strong, Soft, or None.
4. Tap “OK.”
5. You will be automatically reverted to the home screen. Don’t worry, your preferred vibration intensity is saved at this point.

To share or upload a video to services like Facebook or YouTube, simply go to your Video App and long press on a video.

Then select Share via. From here you will be given options to share the video with various services.

If you don’t want to have to unlock your screen every time you take your device out of standby then go to Settings – Personal – Lock screen and security.

Then select Screen lock type and select None.

Most Android devices come with an alternative way of entering text called Swype. Many prefer this method and believe it is quicker.

When any text entry box appears, press and hold the box. Then select Input method: SWYPE. Once enabled, you simply drag your finger around the keyboard moving over the letters in the correct order to spell a word.