Huawei GR3 Tips and Tricks

Warning: This will remove ALL data on the phone (but not the MicroSD card).

To perform a hard reset, or factory reset, then there are a number of methods to try:

1) Go to Settings – Personal – Backup and reset – Factory data reset – Reset device. It may ask for a password. Then select Erase everything.

If the phone is totally unresponsive, even after a reboot, then try the following methods.

2) While the phone is turned off, press and hold the Volume Up and Volume Down buttons together. Then, while holding these, press and release the Power button (keep holding the volume buttons). The phone should turn on and a menu will appear. Press the Volume down button to navigate to the Recovery option. Press the Volume Up to select (if that doesn’t work, use the Power button to select). A yellow triangle and an Android logo will appear. Press the Volume Down and Volume Up button together and a recovery menu should appear. Use the Volume buttons to move to the Wipe data/Factory reset option and then press Power to select. Again, use the Volume Down key to choose Yes and press the Power button again to select.

3) While the phone is turned off, press and hold the Volume Down button. Then, while holding, press and release the Power button. A menu should appear. Use the Volume down key to go to Clear Storage. Use the Power button to select the option. Then when asked to confirm, press Volume Up for Yes.

4) While the phone is off, press and hold down Volume Up + Home + Power buttons at the same time. Then release the buttons when you see the Logo. Use the Volume Down button to go down and the Home or Power key to select. Choose the Wipe data/Factory reset option. Then Select Yes to delete all user data. Then choose to reboot the phone.

5) A final method is to enter the code into your phone’s dialler: *2767*3855# This method will not give you an option to reverse the process, so be careful! This method will only work if you can boot into your phone.

A handy feature of Android is to quickly clear your notifications.

Simply pull down your notifications bar by swiping your finger from the top of your phone downwards.

Then when you see each individual notification, swipe your finger left or right to clear each one. You can do this with your Apps too – press and hold the multitasking button. Then swipe left or right to close Apps.

To set your voicemail number which allows your phone to automatically input your voicemail password, then open your Dialler App.

Then press the More or Menu button and choose Call settings. Then scroll down to Voicemail settings and set a Voicemail number (you might need to check with your carrier for the correct number).

Depending on your carrier you may have to enter the series of steps required to go through the voicemail menu, for example: *86,,yourpassword# (a comma inserts a pause).

To soft reset your phone press and hold the Power/Lock button for around 8 to 10 seconds. The phone will restart automatically.

If that doesn’t work, then remove the battery (if it has one). Wait 30 seconds and put the battery back in. Then press the Power/Lock button to turn the phone on.

You can speed up the page load speed on your browser by disabling JavaScript.

To do this, open your Browser, then press the Menu or More button and then Settings. Then select Advanced and change the Enable JavaScript
option.

Please note that this may affect the functionality of some sites.

To use your phone as a WiFi hotspot, tether it via USB or via Bluetooth, then go to Settings – Connections – Mobile hotspot and tethering.

You can then choose from three options:

1) USB – connect your phone via a USB cable. The phone should automatically configure the correct settings.

2) Mobile/WiFi Hotspot – To turn your phone into a WiFi hotspot, press Configure WiFi hotspot. You will then be asked to enter a Network SSID (this is your own name for the WiFi hotspot). Then choose Security and lastly, choose a password (this is password for your WiFi hotspot which you will enter on your computer).

3) Bluetooth – With this option, you will need to pair a Bluetooth device with your phone. On the other device, ensure you search for Bluetooth devices and your phone should show up.

To save an image in an email or in the browser, long press on the image and a menu will appear allowing you to save it.

For images inside text messages, you might have to press and hold on the message itself, rather than the image.

Android has a feature allowing you to update Applications automatically. This is turned off by default, but you can turn it on.

Open the Play Store App and press the Menu icon in the top left of the App. Then select Settings and Auto-update apps.

From here you can chose to do this over WiFi only or using your Data connection.

If you would prefer to correct your own mistakes, then go to Settings – System – Language and input.

Then select the keyboard you are using and press the Settings icon again.

You should be able to find a predictive text option on this screen.

If you would like to unmount your SD card for whatever reason, then drag down your notifications menu from the top of the screen and press the Settings icon.

Then find Storage – SD card – Unmount SD card.